How to fix KitchenAid Stove error code F2-E1?

Published & Fact Checked by
Published on: , Last Updated on July 22, 2023

Ai Disclaimer: We don't use AI for content or research. The contents is researched and written by our team.

» Home » Error Codes » Electronics Products » How to fix KitchenAid Stove error code F2-E1?
In the following article, we shall be discussing in detail, all that there is to know about the KitchenAid Stove Error Code F2-E1. From Why your KitchenAid Stove is showing the Error Code F2-E1, to the different ways to fix the Error Code F2-E1 on your KitchenAid Stove, we shall discuss it all.

There is just no doubt that when it comes to kitchen appliances and essentials, KitechenAid is one such name which always comes first.

That being said however, there are times when problems and errors with even the best of products in the market is something which is just inevitable and cannot be prevented.

And, since you are already here reading the following article on, “How to fix KithchenAid Stove Error Code F2-E1?”. My guess is that you have already come across such an issue and need ways to fix the problem ASAP.

Good news is that you have come to the right place.

In the following article, we shall be discussing in detail, all that there is to know about the KitchenAid Stove Error Code F2-E1. From Why your KitchenAid Stove is showing the Error Code F2-E1, to the different ways to fix the Error Code F2-E1 on your KitchenAid Stove, we shall discuss it all.

Why is my KitchenAid Stove showing the Error Code F2-E1?

Well, if your KitchenAid Stove is showing the Error Code F2-E1 on its screen. Then most probably there is an issue with your stove’s touchpad or its control board.

Now, the problem with your touchpad or control board can either be due to a software problem or can even be due to a hardware issue with the built-in circuit on your control board. 

If the problem is due to a software issue. Then, a simple reset or unplugging the cable of your Stove as shown in the steps below should do the trick.

However, if the issue is a serious malfunction or fault in the stove hardware, mainly the touchpad or control board. Then, you might need to go for a replacement, which too we will be covering in the following article just so that you don’t have to pay more than what you should on getting the right replacements for your stove to be working properly. 

So, without any further ado, let us straight away head to the part where we discuss all the possible troubleshooting ways to fix the Error Code F2-E1 on your KitchenAid Stove.

How to fix Error Code F2-E1 on KitchenAid Stove?

Below, I have listed out some of the most common and popular ways to help you fix the error code F2-E1 on your own as well as provided links to various components which you can get online for cheaper prices, instead of completely relying on the KitchenAid’s overpriced component site listings. 

This way if there is something wrong with a single component, with your stove’s control board. Then, you can easily get that specific component replaced, instead of paying for the whole thing to get replaced.

Fix 1: Try Unplugging and Replugging the Cable

If you are getting a problem on the screen due to a loose connection between your stove’s touchpad and control board. Then, simply fixing up the loose connection may prove enough to solve the issue.

  • For this method, you will first need to switch off the device completely and cut off the power supply from the main board. 
  • Then, go and check whether the connection between your stove’s touchpad and control board are intact and connected properly.
  • Even if it has been connected properly, plug off the cable between the two and re-plug it tightly back to its original position. 
  • Once re-plugged, ensure that it has been properly connected and see whether the error still persists.

Fix 2: Try Resetting the device

Another great solution to fix the error code F2-E1 arising from software issues, is to try and reset the stove appliance. Although this is not a sure shot way to fix or solve the issue. Many users however, have found this trick rather very useful. 

For this method all you need to do is, switch off your house’s main fuse or circuit breaker to cut off electricity to your whole household and switch it back on. It is ideal to repeat this for a couple of times and see whether the problem still exists. 

Moreover, while trying out this trick it is important that you switch off and unplug all other devices and electric appliances from their respective power sources to avoid any damage to them in the process.

Fix 3: Try Replacing the damaged components

For this, you will obviously need a professional helping hand. That too specially, if you are not very technically sound and not very sure of what actually is going on inside your device. 

You can either directly contact KitchenAid’s official Help Desk for their assistance and guidance. Or, if the issue is not very critical and just a problem with one or two components within the control board.

Then, it is better to ask your local technician for his or her expert opinion and then get the components from the list provided below for reasonable prices. 

Now, the below list is just there for reference purposes and it is not at all compulsory that you purchase the required components from these very links provided. If you can score a cheaper and more reasonable deal for a better price, then surely and absolutely go for it. 

To find components according to your needs and requirements, you can go to the following website, Repair Clinic.

Here, you can search for all kinds of components for your desired brands as well as models, and get them for prices which are reasonable and convenient than most other vendors and sources.

You can also refer to the following website, Appliance parts pros. This website too, like the earlier one, consists of parts which you can get for a good deal. Simply, choose the component you are looking for and put your order when it seems like a good bargain.


Hence, in this way by following the simple steps as shown above, you should be able to fix the issue pretty much on your own, without having to rely on KitchenAid’s customer support for most parts. 

However, if the issue is not as simple as mentioned above and one that needs expert and professional help. Then, it would be best that you contact KitchenAid’s Service and Support Help Desk at the earliest and ask them for assistance required to fix your appliance and make it as good as new. 

Like This Post? Checkout More

Photo of author
Rishikesh Hazarika is a tech enthusiast who is always curious to learn and absorb facts and data in the world of science and technology as well as tries to share his opinion. He has an M.Tech degree from North-Eastern Hill University, later he did a certificate course in Computer Hardware and Software, and a certificate course in Introduction to Architectingc