There are many errors on DStv but one of the common ones is the no signal error. This can be due to many issues.
When you receive the error e48-32 DStv, it means that your TV box is not receiving a signal. Since there is not a definite reason for us to put our finger on, we will need to explore the different reasons for this issue.
In the next section, we will discuss the different possibilities of this error code as well as the solutions for the same.
Let’s dive into it.
How to solve the error code e48-32 on DStv?
There are many causes of signal interruption for the DStv box. We will explore each one of them in detail in this section.
Let’s discuss the solutions for the error code e48-32 on DStv.
Fix 1: Take a rain check
No, we do not mean to tell you to postpone your error-solving. Just check for the climate outside and verify if the weather is cloudy or if it is raining.
When the clouds cover the horizon and there is rainfall in the area, your signal might be temporarily cut off till the weather clears.
We know that this is annoying but you have to wait till the weather clears to work with the DStv connection again.
Fix 2: Check if the antenna has some physical interference
The antenna needs to have a clear range to provide you with the best connection possible. Since it is an outdoor unit, sometimes factors like the outgrowth of plants and other building-related constructions can come in the way.
If you are regularly facing this error, check if the range of the antenna is clear. If you find any physical interference, remove it or shift the antenna whatever is feasible.
Also, try to place the antenna in a place with minimal plants in the house to avoid this issue.
Fix 3: Check the wiring
The connections of the DStv box are highly reliant on different cables and wires. Any break or bend in the wires can cause the signal to drop and you will not be able to stream cable TV content.
Check for all the wire connections to be secure and without any bends or cuts. You can also use a cable protector to keep your cables protected from regular wear and tear.
Also if you find that the wires that are connected to the TV box and other types of machinery are broken, this means that you need to rethink the positioning of the wires in your house.
Replace any broken cables immediately to avoid the risk of fire or electrocution. This can become very serious very fast if not taken seriously.
Fix 4: Contact the DStv support team
If your issue is not described by anything said above, it is best to contact the support team at DStv because it could also be a problem at their end.
They will be providing you with troubleshooting assistance and will also provide you with a technician to evaluate your connections so that any issue can be identified and sorted.
To conclude
The error code e48-32 on DStv is a signal issue on the cable box. Usually, it is related to the problems with the dish antenna or the factors that are physical interference in the placement of the antenna.
We have mentioned all the scenarios for this to happen. We hope that we were able to help you get rid of the issue. Keep following for more technical advice.
Happy Streaming!!
Like This Post? Checkout More
